Main Menu

istruzioni11

Helmets: Zar Vintage – Zeon Vintage

LINER – ZEON VINTAGE 2.0 + ZEON PLUS + ZAR VINTAGE 2.0 + ZAR CLASSIC

 To take away look at the video on You Tube or follow the instructions and feel free to phone our company on Friday.
To insert, massage back pad and tighten the front to adhere to the shell.

ZEON & ZEON PLUS VISOR

To take apart the visor from the helmet unscrew the two aluminum screws positioned on both sides.
To use the helmet without the visor place again the aluminum screws above the washer in aluminum and the    Eva washer.
To put back the visor: Put in place the polycarbonate washer first, inserting the larger hinge pin in the lowest  hole and the smaller hinge pin in the higher hole;Then, put back the visor in standing position, paying attention that the hinge pins go inside their holes; At the end, place the aluminum washer and screw the screw.

ZEON VINTAGE 2.0 + ZAR VINTAGE 2.0 VISOR

To dismount the visor unscrew the 2 screw that  hold the visor and tighten only the screws without the the white washer.
To mount the visor get out the screws put on the visor with the white washer and tighten the screws

ZEON PLUS & ZAR CLASSIC INNER BONNET 2.0

To remove and adjust the inner-part of either the ZEON PLUS or the ZAR CLASSIC:Take out the central part of the forehead first by sliding it sideways; Then, take out the two flaps located at the two opposed sides of the foreheads and pull out the  sides; Finally, to take out the posterior part it is necessary to rotate it to slide the pin laterally.

Follow the instructions that you find on You Tube video.

To put everything back: First insert the  the back and massage until it adher to the shell.

Please note: the helmet samples on our agent’s hands are equipped with strait flaps  in order to dimostrate and facilitate the removal operation. Take care to the dissembly of internal.

LEATHER CARE

ZEON and ZAR helmets are coated in true leather.

“Crocco” printed leather is resistant, but it is also delicate, especially in the hide version brown colour . If in contact with water, it should be dried rapidly with a cloth. Once it is dry, it is appropriate to treat it with a product waterproofing the leather, such as specific creams or waxes, which could revive its surface.

Some of the apparent leather imperfections, in reality are the qualities of this material. Those qualities are exactly the characteristics that differentiate leather products from the synthetic ones, even if they appear to be of value.

When ZEON is used without visor a washer in EVA is needed, it is available  and it will be sent free of charge by mail to final customer